Mini Gas Series Boilers: Dimensions and Specifications
Features and Components | Dimensions and Specifications | User Manual | Brochure


Mini Gas Boiler

Allow 18" minimum
in front for servicing
2" clearance to combustible
surfaces on both sides and rear

A SMALL FOOTPRINT SAVES VALUABLE
SPACE AND FITS ALMOST ANYWHERE,
INCLUDING CLOSET INSTALLATIONS.
APPROVED FOR COMBUSTIBLE FLOORS.

Standard Models Include:
Zone Control Board
Stainless Steel Burners
Combination Gas Valve
Operating Aquastat/High
   Limit
Temperature/Pres Gauge
ASME Safety Relief Valve
Drain Valve
Draft Hood
Blocked Vent Safety Switch
Flame Roll Out Safety
  Switch
Automatic Vent Damper
“PS” Models Include:
Standard model parts plus:
Circulator wired & mounted
Custom Cast Iron Pump
  Adapter
Expansion Tank
Air Purger Combination
Fill/Pressure Regulating
  Valve
Automatic Air Vent
Model
NO.
Natural Gas
Intermittent Pilot
Metric
Conversion
Dimensions Weight
Lbs.
BTU/h kW A B C D
INPUT OUTPUT INPUT OUTPUT INS MM INS MM INS MM INS MM
MG - 50 50,000 42,400 14.7 12.4 11.5 292 6.25 158 4.0 102 43.7 1110 125
MG - 75 75,000 63,450 22.0 18.6 14.5 368 6.25 158 5.0 127 44.0 1118 150
MG - 100 100,000 84,600 29.3 24.8 17.5 445 6.25 158 5.0 127 44.0 1118 175
MG - 125 125,000 105,500 36.6 31.0 20.5 521 7.00 178 6.0 152 45.0 1143 205
MG - 150 150,000 126,450 44.0 37.1 23.5 597 7.00 178 6.0 152 45.0 1143 235

Add 35 lbs to Weights for "PS" Packaged Models
Available in Propane - Derate inputs/outputs by 10%
Available with Intermittent Electronic Pilot Ignition
For Btu/h ratings above 2000 feet contact the factory.

The "Super Hot" product improvement program may result in changes to design and/or specifications being made without notice.

               
Mini-Gas | Mini-Star | AAE Series | Saturn Series | Space-Saver Combo | Sealed Combustion Gas Boiler | BT Series Electric Boiler | Copper Coil Heat Exchangers | Electric Booster | Stainless Steel Indirect Fired Hot Water Tanks

© Allied Engineering Company. All rights reserved.